1×8 mechanical optical switch
Description
XH-OSW-1×8 mechanical optical switch is a kind of light path control equipment,Can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Feratures
- Low Insertion Loss
- WideWavelength Range
- TTL level control, easy to control
- Imported components, better stability
- Drive circuit breakdown self check function
- Modular design, convenient for secondary development
Application
- Optical Signal Switching and Routing
- Optical Network Monitoring
- Testing of Fiber Optic Component
- OTDR Testing
|
Specifications of the Single-Mode (SM) Fiber Switches |
|
| Number of Channels (N) | 1×N (N ≤ 16) or other channel counts on request |
| Fiber Type | Single-mode fibers |
| Insertion Loss | ≤ 2.0 dB @ 430-670 nm
≤ 1.5 dB @ 780-1250 nm ≤ 1.0 dB @ 1260-1590 nm ≤ 1.5 dB @ 1600-2000 nm |
| Wavelength Range | 400~2000nm |
| Wavelength Testing | 405, 450, 480, 532, 650, 780, 850, 980, 1060,1310, 1490, 1550, 1625, 1650, etc. |
| Return Loss | ≥ 50 dB |
| Crosstalk | ≥ 70 dB |
| Polarization Dependent Loss (PDL) | ≤0.05 dB |
| Wavelength Dependent Loss (WDL) | ≤0.25 dB |
| Temperature Dependent Loss (TDL) | ≤0.25 dB |
| Repeatability | ≤0.02 dB |
| Lifetime | ＞107 |
| Switching Time | ≤8 ms （Adjacent channel） |
| Optic Power | ≤500 mw |
| Connector | FC, LC, SC, ST, MPO, etc. |
| Control Mode | TTL |
| Working power supply | 5V/500mA |
| Operating Temperature | -20 ℃ ~ +70 ℃ |
| Storage Temperature (℃) | -40 ℃ ~ +85 ℃ |
| Dimension (mm) | 135 ×64 × 32 mm (Channel Amount ≤ 16) |
Comments are closed