1×32 Rack-mounted optical switch
1×32 rack-mounted optical switch is a kind of functional device,with the ability of controlling and switching optical route. It can be manually selected from front panel or controlled via RS232 port, Ethernet port and auto-scanned on certain frequency. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features
●Low insertion loss, Fast switching
●SerialNet, High Reliability, High Stability
●LCD display panel. Visual display, Convenient operation
●Transparent transmission signal. High stability and reliability
●Channel and time interval of automatic scanning can be set up
● RS232 Control and RJ45 Ethernet Remote Management
Applications
● FITL
● Automatic Measurement
● Optical Network Remote Monitoring
● Cable Monitoring and Maintaining system
Parameters
|
Parameters |
Unit |
Indicators |
|
Unit Type |
|
XH-FSW-1X32–U |
|
Wavelength Range |
nm |
1260~1650nm |
|
Test Wavelength |
nm |
1550nm |
|
Insertion Loss |
dB |
Typ. ≤0.8dB,Max.≤1.5 dB |
|
Repeatability |
dB |
≤ 0.02 |
|
Return Loss |
dB |
≥ 50 |
|
Crosstalk |
dB |
≥ 70 |
|
WDL |
dB |
≤ 0.25 |
|
PDL |
dB |
≤ 0.05 |
|
Optical Power |
mW |
≤ 500 |
|
Switching Time |
ms |
12 ms（adjacent channel） |
|
Fiber Type |
um |
9/125 |
|
Connector |
|
FC/PC |
|
Monitoring Port |
|
RJ45 & RS-232 |
|
Working Power Supply （Plug-type） |
V |
AC:100～ 240 (50/60Hz) |
|
Power Consumption |
W |
＜ 10 |
|
Operating Temperature |
℃ |
-10 ～ 60 |
|
Size |
mm |
2U:483 x 230 x 89 |
Comments are closed