XH-28-D1X2 optical switch equipment

Features

●It has the characteristics of low insertion loss and fast switching speed.

●It can be controlled by RJ45 Ethernet or RS-232 serial port command.

●28 independent control optical switch buttons, easy to operate.

●Two different colors of LED display lights, showing the status of the light path.

● Equipment power supply supports AC: 85~265V AC power supply.

Performance

Panel description

Front panel

（1）RJ45 Ethernet interface, RS-232 serial port: Communication interface for equipment monitoring data information.

（2）ON/OFF：AC-220V power switch.

（3）1-28 buttons: 28 optical switch control buttons.

（4） Whole station/single bay: The green light indicates that the light path is working in the whole station, and the red light means that the light path is working in a single bay.

Right panel

Rear panel

（1）AC:85~265V：AC 22V power interface.

（2）1~28, 1-1~28-1, 1-2~28-2: optical fiber input or output ports; when the device is initially powered on, the optical path status is U row 1~28 U row 1-2~28-2 port, 1~28 of D row, 1-2~28-2 of D row, the indicator light is red; when the button is pressed, the light path indicator light turns green, and the optical path status is 1~28 of U row U row 1- 1~28-1 port, 1~28 of row D is connected to 1-1~28-1 of row D.

Factory settings

●The serial port settings are: 9600 baud, 8 data bits, 1 stop bit, no parity.

●IP address: 192.168.1.100; communication port: 5000

●Network port protocol type: TCP Server (server), UDP (fixed port: 18888)

Note: Unless the user has special requirements.